Above Ground Pool Sizing
Salt Calculator for Above Ground Pools
Most above ground pools hold between 3,000 and 12,000 gallons of water. At a standard 3,000 PPM, you need between 3 and 8 standard 40-lb bags of salt from a fresh fill.
Adjust Pool Parameters
Required Salt Dose
40-lb Salt Bags
0 Bags
0 lbs of pool salt
Kilograms (kg)
0 kg
20kg Bags
0 Bags
Total Gallons
0
Chemical Addition Protocol
1
Turn off salt chlorinator (SWG) cell for 24 hours while salt dissolves.
2
Scatter salt bags evenly around the perimeter deep end. Never dump in skimmer.
3
Brush floor with pool brush until dissolved; run pump continuously for 24 hours.
Salt Dose by Starting Salinity Level
| Current Salt PPM | PPM Needed | Total Salt (lbs) | 40-lb Bags Needed | Total Salt (kg) |
|---|
Frequently Asked Questions
Can you use salt water systems on steel wall above ground pools?
Yes, but check manufacturer warranties. Resin or aluminum components are preferred because salt splashes can corrode galvanized steel if scratches exist.