Hayward Factory Target: 3,200 PPM
Hayward AquaRite Pool Salt Calculator (Target 3,200 PPM)
Hayward specifies 3,200 PPM as the ideal salinity for AquaRite, SwimPure, and ProLogic systems. The cell shuts down with a 'Low Salt' light below 2,500 PPM and 'High Salt' above 4,000 PPM.
Adjust Pool Parameters
Required Salt Dose
40-lb Salt Bags
0 Bags
0 lbs of pool salt
Kilograms (kg)
0 kg
20kg Bags
0 Bags
Total Gallons
0
Chemical Addition Protocol
1
Turn off salt chlorinator (SWG) cell for 24 hours while salt dissolves.
2
Scatter salt bags evenly around the perimeter deep end. Never dump in skimmer.
3
Brush floor with pool brush until dissolved; run pump continuously for 24 hours.
Salt Dose by Starting Salinity Level
| Current Salt PPM | PPM Needed | Total Salt (lbs) | 40-lb Bags Needed | Total Salt (kg) |
|---|
Frequently Asked Questions
What is the best salt level for Hayward AquaRite?
Hayward recommends maintaining exactly 3,200 PPM. The system operates efficiently between 2,700 and 3,400 PPM.